1. Rossi I., and Traverso A., 2018, “Ambient temperature impact on micro gas turbines: Experimental characterization”, Acta Polytechnica CTU Proceedings, 20:78-85, https://doi.org/10.14311/APP.2018.20.0078

2. Giugno A., Cuneo A., Piantelli L., and Sorce A., 2018, “Integration of heat pump and gas turbine combined cycle: layout and market opportunity”, 9th International Gas Turbine Conference, 10-11 October 2018, Brussels, Belgium, Paper ID Number: 54-IGTC18

3. Guédez R., Garcia J., Nuutinen A., Graziano G., Martin G., Chiu J., and Laumert B., 2018, “ Combined cycles integrated with a heat pump and thermal energy storage system for air pre-cooling – a techno-economic analysis, 9th International Gas Turbine Conference, 10-11 October 2018, Brussels, Belgium, Paper ID Number: 57-IGTC18

4. Rossi I., Reveillere A., and Planchon F., 2018, “Intelligent predictive control of a pump-heat combined cycle: Introduction and first results”, 9th International Gas Turbine Conference, 10-11 October 2018, Brussels, Belgium, Paper ID Number: 59-IGTC18

5. Bosser S., Buddenberg T., and Joormann M., 2018, “High temperature heat pump – a novel approach to increase flexibility and efficiency of CCGT and CHP power plants” 9th International Gas Turbine Conference, 10-11 October 2018, Brussels, Belgium, Paper ID Number: 56-IGTC18

6. Gkoutzamanis V., Chatziangelidou A., Efstathiadis T., Kalfas A., Traverso A. and Chiu J., 2019, “Thermal energy storage for gas turbine power augmentation”, Global Power and Propulsion (GPPS) Society, Proceedings of Zurich 2019, GPPS-TC-2019-72

7. Ntatsis K., Chatziangelidou A., Efstathiadis T., Gkoutzamanis V., Silvestri P., and Kalfas A., 2019, “CFD analysis of a Tesla turboexpander using single phase steam”, Global Power and Propulsion (GPPS) Society, Proceedings of Zurich 2019, GPPS-TC-2019-89

 

9. Vannoni A., Sorce A., Bosser S., and Buddenberg T., (2019), “ Heat Recovery from Combined Cycle Power Plants for Heat Pumps”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

10. Renuke A., Traverso A., and Pascenti M., (2019), “Performance Assessment of Bladeless Micro Expanders Using 3D Numerical Simulation”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

11. Gkoutzamanis V., Chiu J., Martin G., and Kalfas A., (2019), “Thermal energy storage in combined cycle power plants: comparing finite volume to finite element methods”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

12. Papagianni A., Efstathiadis T., Gaitanis A., Kalfas a., “Modelling of a Tesla turbine gap between rotor disks”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

13. Traverso A., Reggio F., Silvestri P., Rizzo S., Engelbrecht G., Chasoglou A.,”Two-phase flow expansion: development of an innovative test-rig for flow characterisation and CFD validation”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

14. Engelbrecht G., Giakoumis Z., Sidiropoulos S., Chasoglou A., Chokani N., “Modelling phase change in a novel turbo
expander for application to heat pumps and refrigeration cycles”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

15. Xu T., Gkoutzamanis V., Muhammad T., Efstathiadis T., Kalfas A., Laumert B., and Chiu J., “Design aspects of a latent heat storage unit for heat production shifting at a cogeneration plant”, Solar World Congress, November 4th – 7th , Santiago, Chile

 

16. Giugno A., Sorce A., Cuneo A., and Barberis S., (2019), “Integration of Heat Pump and Gas Turbine Combined Cycle: Market and Climatic Conditions for Power Plant Flexibility Enhancement”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

17. Réveillère A., Longeon M., and Rossi I., (2019), “Dynamic Simulation of A Combined Cycle for Power Plant Flexibility Enhancement”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

18. Rossi I., Réveillère A., and Traverso A., (2019), “Flexibilization of Gas Turbine Combined Cycle via Heat Pump: Development of Control Logics via Software-In-The-Loop Application”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

19. Rossi I., and Cailliere R., (2019), “Development and Installation of Control System for a Test Rig Interconnecting a Micro Gas Turbine, A Heat Pump and a PCM storage system”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

20. Renuke A., Traverso A., and Pascenti M., (2019), “Experimental Campaign Tests on a Tesla Micro-expander”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

21. Niccolini C. A., Du Haut Champ M., Stefani F., and Silvestri P., (2019), “Development of a New Test Rig for the Analysis of Hydrodynamic Bearings for Rotors of Microgt”, Sustainable PolyEnergy generation and HaRvesting Conference and Exhibhition – SUPEHR19, September 4th – 6th , Savona, Italy

 

22. Renuke A., Traverso A., and Pascenti M., (2019), “Experimental and computational investigation of Tesla Air Micro-Expanders”, International Gas Turbine Congress (IGTC) 2019, Tokyo

 

23. Watanabe Y., Traverso A., (2019), “Dynamic Simulation of Steam Bottoming System in a Combined Cycle Power Plant with Modelica”, International Gas Turbine Congress (IGTC) 2019, Tokyo